Press key
for 3 seconds to edit the value. The
icon appears at the top of the screen.
To enter or modify the value, press the
key repeatedly, increasing the value of the flashing digit.
When the desired value is shown on the screen, move onto the next digit by pressing the key
to
modify the other values.
Press key
to browse the different tariffs.
To validate the data, press
for 3 seconds and the
icon will disappear from the display.
The programmed value will be deleted if the entered value is higher than the maximum programming
value.
Configuration values
Table 40:Configuration values: emission ratio, generated energy�
Emission ratio, generated energy
Minimum value
0
Maximum value
1.9999
Press key
to access the next programming step.
6�23�-
COST RATIO OF CONSUMED ENERGY
The cost per kWh of electricity of the three tariffs of the device is calculated on this screen.
Press key
for 3 seconds to edit the value. The
icon appears at the top of the screen.
To enter or modify the value, press the
key repeatedly, increasing the value of the flashing digit.
When the desired value is shown on the screen, move onto the next digit by pressing the key
to
modify the other values.
54
CVM-C11
Instruction Manual
