1.- VERIFICATION UPON RECEPTION
Check the following points when you receive the device:
a) The device meets the specifications described in your order.
b) The device has not suffered any damage during transport.
c) Perform an external visual inspection of the device prior to switching it on.
d) Check that it has been delivered with the following:
- An installation guide,
- 2 Retainers used to attach the device,
- 5 connectors.
If any problem is noticed upon reception, immediately contact the transport com-
pany and/or
CIRCUTOR's
after-sales service.
2.- PRODUCT DESCRIPTION
The
CVM-C10
device measures, calculates and displays the main electrical parameters of the follow-
ing networks: single-phase, two-phase, with and without neutral, balanced three-phase, with ARON
measurements or unbalanced. The measurement will be taken in RMS with the three AC voltage inputs
and three current inputs.
There are 6 versions of the device, depending on the type of current input:
CVM-C10-ITF,
indirect current measurement with /5A or /1A transformers.
CVM-C10-ITF-IN,
indirect current measurement with /5A or /1A transformers and an input to
measure the neutral current.
CVM-C10-MC
, indirect current measurement with efficient transformers of the MC1 and MC3
series.
CVM-C10-MC-IN
, indirect current measurement with efficient transformers of the MC1 and
MC3 series and an input to measure the neutral current.
CVM-C10-mV
indirect current measurement with /0.333V transformers.
CVM-C10-FLEX
current measurement through Rogowski sensors.
The device features:
- 3 keys
that allow you to browse between the various screens and program the device.
- 3 indicator LEDs
: CPU, ALARM and KEY.
- LCD display
, displays all parameters,
7
Instruction Manual
CVM-C10
