Note:
Programming the value
0
disables the calculation of the maximum demand.
Press key
to access the next programming step.
4�9�11� DELETING MAXIMUM DEMAND
On this screen you select whether or not to delete the maximum
demand.
Press key
for 3 seconds to edit the deletion selection. The
prog
icon will be displayed on the bottom of the screen.
Press key
to browse the two deletion options: Yes or No.
To validate the data, press
for 3 seconds and the
prog
icon will disappear from the display.
Press key
to access the next programming step
4�9�12� SELECTING THE OPERATION PROFILE
The unit's operation profile is selected on this screen.
Press key
for 3 seconds to edit the operation profile selection. The
prog
icon will be displayed on the bottom of the screen.
Press key
to browse the three profile options:
Analyzer profile,
analyzer
,
Electrical energy efficiency profile,
e
3
,
User profile,
user
,
To validate the data, press
for 3 seconds and the
prog
icon will disappear from the display.
Press key
to access the next programming step
Selecting the screens that will be displayed (
User profile
)
The following screen is displayed if you have selected the
user
profile:
This screen is used to select whether the unit's display screens are
defined by the user or not.
Press key
for 3 seconds to edit the selection. The
prog
icon will
be displayed on the bottom of the screen.
Press key
to browse the two profile options:
52
CVM-C10
Instruction Manual
