5�20�- CLEAR
In this point it is possible to configure whether or not to delete (
YES
or
No
) the maximum and
minimum values, the energies and the number of connections of the stages.
Press the
key to enter editing mode. It is identified by the
symbol and the blinking of the
digits to be modified.
The following parameters can be deleted:
n
: maximum and minimum values.
E
: energies.
C
: number of connections of the stages.
The
key shows the next option.
The
key shows the previous option.
The
key skips to the previous parameter.
The
key skips to the next parameter.
Press
to validate the data; the
symbol disappears from the display.
Press the
key to access the next programming step.
If no keys are pressed for 5 minutes, the unit switches to the simulation screen,
.
92
Computer SMART III FAST
Instruction Manual
Summary of Contents for Computer SMART III FAST 12
