Press the
key to enter editing mode. It is identified by the
symbol and the blinking of the
digits to be modified.
The
key shows the next option.
The
key shows the previous option.
The
key skips to the previous voltage.
The
key skips to the next voltage.
Press
to validate the data; the
symbol disappears from the display.
Press the
key to access the next programming step.
If no keys are pressed for 5 minutes, the unit switches to the simulation screen,
.
5�7�- NO� OF STAGES
In this point the number of stages is selected, in other words the number of relay outputs that the
unit will have.
Depending on whether the model is
Computer SMART III FAST 6
or
SMART III FAST 12
, it can be
configured with up to 6 or up to 12 outputs.
Press the
key to enter editing mode. It is identified by the
symbol and the blinking of the
digits to be modified.
77
Instruction Manual
Computer SMART III FAST
Summary of Contents for Computer SMART III FAST 12
