60
COMPACT DC
Instruction Manual
TimeDelayRestart:
Waiting time to continue the tasks, in seconds.
RetryDisconMeterOrder:
Number of retries at communication in orders.
TimeRetryIntervalOrder:
Time between retries at communications in orders, in seconds.
CLec:
Default password for energy meter read-only access.
CGec:
Default password for energy meter management (write) access.
CAct:
Default password for energy meter update (firmware) access.
SearchPassword:
If this parameter is enabled, when the password is incorrect the device tries
other known passwords.
UsePassive:
Whether or not to activate the use of passive mode, actDate can be used to activate
a talent contract.
5�14�12� OTHER PARAMETERS
Figure 71:Configuration of other parameters�
In this section you can configure the following parameters:
Location:
Location of the device.
ReportFormat:
Whether or not to compress reports.
ResetMsg:
Whether or not the concentrator sends a message to the STC after resetting.
SourceData:
Origin of the report data. The possible options are:
Only data base
:
The report data are from the concentrator's database.
Only
meter:
The report data is requested each time from the energy meter.
Both:
The two previous options are carried out, thus optimising data acquisition from the devices.
StgVersion:
STG version to be used.
AutoUpg:
Enable or disable automatic updates. If the automatic update is activated, once a month
(between the 10th and the 20th) the concentrator will download the "
UpgradeFileInfo�xml
" file lo-
cated in the root directory of the FTP server defined in
lpFtpDCUgp
to determine the latest version
available. If the concentrator version is earlier than the version defined in the file, the concentrator
will be upgraded automatically.
Example of the file
:
<File name=”CIR_PLC1000_v0�7�5�tar” ver=”0�7�5”/>
TaskScheduler:
Task planner enabled or disabled.
ReportDepth:
Maximum depth of report recovery, in days. Except for
S04
.
ResetRandomDelay:
Ramdom delay to perform reset task
T01
.
