58
COMPACT DC
Instruction Manual
5�14�9� FRAMES LOG CONFIGURATION
Figure 68:Frames log configuration�
In this section you can configure the following frame log setup parameters so the concentrator can
capture PRIME frames:
FrameLogMode:
Frame log mode.
NameFrames:
Name of the file.
IpFtpFrames:
IP address of the frame log server.
DestDirFrames:
Path of the frame log server.
UserFtpFrames:
Username of the frame log server.
PwdFtpFrames:
Password of the frame log server.
MaxLinesFrames:
Maximum number of lines.
TimeWaitFrames:
Maximum wait time, in seconds.
5�14�10� PRIME REMOTE TOOLS
Figure 69: PRIME remote tools�
In this section you can configure the parameters for the remote capture of PRIME frames:
SnifferTCP:
Enabling or not of remote frame capture.
SnifferOptionalTCP:
Enabling or not of optional fields for frame capture.
TopologyTCP:
Enabling or not of the topology register.
IpTCP:
Remote sniffer or topology IP address.
PortTCP:
Remote sniffer or topology port.
FuPort:
Firmware upgrade interface port for PRIME nodes.
