7
B.3.2 ATEX Nameplate
C
Safety
C.1 Important Notice
Read these operating instructions before installation and/or start-up of the pump.
WARNING
Installation, operation, and maintenance instructions must be correctly and strictly followed, else,
injury to personnel or serious damage to the pump could result.
Imo Pump cannot accept responsibility for unsatisfactory performance or damage resulting from
failure to comply with instructions.
This manual will not cover all situations which might arise with regard to installation, operation, inspection,
and maintenance of the equipment supplied. Imo Pump assumes the personnel assigned to install, operate
and maintain the supplied equipment have sufficient technical knowledge to apply generally accepted safety
and operational practices, which may not be otherwise covered.
Every effort was made to prepare the text of this manual so that technical information is conveyed in easy to
understand wording.
C.2 Operating Instructions of the Operating Party
As the operating party, you are responsible for creating specific operating instructions for your personnel
based on your
company’s
specific operating conditions. Use this manual to help build your own detailed set
of instructions.
C.3 Intended Use
WARNING
Using the pump for processes other than those for which it is intended could result in pump
failure or personal harm.
The Imo Pump is a precision device, and is designed to be used as such. If there is a need to operate the
pump in a way
that is outside the original, published specifications, contact Imo Pump prior to operation for assistance and
recommendations.
