SERVICE MANUAL
–
Post eVolve Smart
8 - OTHER DEVICES
CIRCONTROL, S.A.
–
Innovació, 3
–
08232
–
Viladecavalls (Barcelona)
Tel.: +34 937 362 940
–
Fax: +34 937 362 941
40
Web: www.circontrol.com
–
E-mail:
8.2.2
WIRING CONNECTION
Following image shows a detailed schematic of the connections. Please, refer to "
” section for more details.
THERMOSTAT
HEATER
MCB
Q03.1
8.2.3
DEVICE CONFIGURATION PROCEDURE
-
Thermostat is installed at the top of the Charge Point
.
Please, refer to “
” section
for more details.
-
Heater is installed at the bottom of the Charge Point
in order to supply heat
to all devices located in the upper part.
Please, refer to “
” section
for more details.
The recommended setting of the thermostat is at 5ºC. If thermostat
value is changed, the normal operation of the devices can be
affected.
5
