CipherLab RS51 Reference Manual Download

Page: 107 / 209

107

Basic Operation

3.2.

STATUS BAR

The left side of the status bar shows

notification icons

, and the right side of the status bar shows

status icons

3.2.1.

ICONS ON STATUS BAR

STATUS ICONS

Icon

Description

The device has been connected to a Bluetooth device.

The device is currently connected to a Wi-Fi network and performing
data transmission.

Airplane mode is active, which means all radios are inactive now.

Alarm is active.

All sounds are silent except for alarms (Vibration mode).

Wi-Fi hotspot is active.

The main battery is fully charged.

The main battery is partially drained.

Main battery level is very low and needs charging immediately (<5%).

External power source is connected and main battery is being charged.

Summary of Contents for RS51


















































































































































































































Search results

Summary of Contents for RS51

Reviews:

Related manuals for RS51

Brands by name

Popular brands

CipherLab RS51, Reference Manual

Search results

Summary of Contents for RS51

Reviews:

Related manuals for RS51

Brands by name

Popular brands