www.cipherlab.com
1.
2.
Main Charging Station (for RS50 Mobile Computer)
Spare Battery Charging Station Status LED
Open Your Box
a
a
RS50 Charging & Communication Cradle
Quick Start Guide
a
a
Micro USB Cable
Adapter plus power cord
Basics
EN
>
RS50 Charging & Comm. Cradle
Quick Start Guide
The RS50 Charging & Communication Cradle allows charging and data transmission of the RS50
Mobile Computer. Aside from a main charging station, the Cradle is equipped with a spare battery
chamber, which helps maintain a charged spare battery for your convenient use.
Overview
3.
4.
5.
Spare Battery Charging Station
Micro USB Receptacle
Power Jack
Power Supply
Battery Pack
(optional)
Charging Time
Important Charging Information
3.8V, 4000
/3.75V, 5300mAh (Standard/Extended) rechargeable
Li-ion,
mAh
CipherLab proprietary
Input: AC 100-240V, 50-60Hz; output: 5V/4A
CipherLab approved
Approx. 5 hours/6 hours (Standard/Extended battery)
3
4
5
2
1
>>
LED Indicators
For charging status of main charging station, please
see LED on mobile computer.
For charging status of spare battery charging
station, please see LED on Cradle.
Green, solid
Red, solid
LED Indicator
Battery is fully charged
Battery is charging
Red, blinking
Battery charging error
EN
Red, blink once
Adapter is plugged in but no battery
To remove battery:
Pull the latch to remove the battery
Charging and Communication
Step 1:
Step 2:
Step 3:
Place RS50 Mobile Computer in the main charging station.
Insert battery in the spare battery charging station.
Plug in USB connecter for data transmission and/or adapter plug for charging.
(To charge both RS50 Mobile Computer and the spare battery at the same time, be sure
to have the adapter plugged in.)
For data transmission, connect USB cable to PC.
For charging, connect power cord to adapter and plug power cord to electrical outlet.
LED on Cradle or Mobile Computer will light up in green or red depending on the battery
level at the moment.
3
Main charging station
Place mobile computer onto Cradle.
:
Spare battery charging station
Insert battery with contact pins facing
down and press upper end in.
:
1
Note:
To extend the endurance of the connector
pin, please plug and unplug the device
smoothly, with a vertical movement.
2