CipherLab RS31, Reference Manual

Page: 117 / 181

117
Wireless Radios
4.2.2. MANUALLY ADD WI-FI NETWORK
If the network you would like to connect to does not broadcast its SSID, or if the network is
out of range, you may add it manually.
1)
Tap All Apps | Settings | Wi-Fi .
2)
Tap the Wi-Fi switch to enable this function, and then tap More and select “Add
network”.
3)
In the dialog box, enter the name of the network in the Network name field, and select
a security method in the Security field (None, WEP, WPA/WPA2 PSK, 802.1x EAP).

For WEP/WPA/WPA2 PSK connections: Enter the required password and tap Save.

For 802.1x EAP connections: Tap Advanced options and select the EAP method in the
drop-down box (PEAP, TLS, TTLS, PWD, SIM, AKA), and the Phase 2 authentication in
the drop-down box (None, MSCHAPV2, GTC). Select a CA certificate and User
certificate if required (certificates may be installed under
All Apps
| Settings | Security | Install from SD card
OR All Apps | Settings | Wi-Fi | More | Advanced | Install
certificates.) Enter your username in the Identity box and the password in the Password
box if required.
The mobile computer supports the following certificate file extensions:
4)
If necessary, select the Proxy server and IPv4 settings. By default, no proxy is set and
IP settings are set to DHCP.
File Extension Type Standard Certificate Key Stored
Description
DER-encoded X.509
certificates saved in
.crt or .cer files.
X.509 certificates saved in PKCS#12
key store files with a .p12 or .pfx
extension.
How to install
change the extension to
.crt or .cer.
Change the extension to
.p12 or .pfx.