CipherLab RS31 Reference Manual Download Page 104

Page: 104 / 181

104

RS31 Mobile Computer

3.7.

RESET TO FACTORY DEFAULT

Performing a factory reset will erase all data on your mobile computer (including call logs,

messages, files as well as your installed apps and their associated data) and revert the

device back to its original state in which it is powered on by you for the first time.
It is strongly recommended that you follow the instructions in

Back up Your Data

to back up

important data before performing a factory reset.
To start:

Tap All Apps

| Settings

| Backup & reset and Factory data reset.

Confirm the action by tapping on the buttons and input the verification code (Please

contact with

[email protected]

to obtain your verification code). Finally, tap OK

to perform a factory reset.

Summary of Contents for RS31






















































































































































































Search results

Summary of Contents for RS31

Reviews:

Related manuals for RS31

Brands by name

Popular brands

CipherLab RS31, Reference Manual

Search results

Summary of Contents for RS31

Reviews:

Related manuals for RS31

Brands by name

Popular brands