CipherLab RK25WO Reference Manual Download

Page: 31 / 241

Quick Start

1.1.3.

POWER ON/OFF MOBILE COMPUTER

POWER ON

To power on the mobile computer, press and hold the power button

located on the top

end of the device. The mobile computer will turn on and show the

Home Screen

after splash

screen.

Note:
For the mobile computer to power on, the battery cover must be secured in place.

POWER OFF

To power off the mobile computer, press and hold the power button

for more than three

seconds. A menu will appear on-screen which allows you to power off the device. Make sure
all user data and tasks have been stored before tapping on

Power off

Power Button

Summary of Contents for RK25WO


















































































































































































































































Search results

Summary of Contents for RK25WO

Reviews:

Related manuals for RK25WO

Brands by name

Popular brands

CipherLab RK25WO, Reference Manual

Search results

Summary of Contents for RK25WO

Reviews:

Related manuals for RK25WO

Brands by name

Popular brands