CipherLab CP55, Reference Manual

Page: 97 / 287

81
Chapter 2 Data Capture
2.2.4. READ AND WRITE RFID TAGS
To read an RFID tag:
1) Adjust the RFID reader settings first. For instance, specify how many bytes you would
like to read from the tag, the start position to collect data, where and how to output data
in
Data Output . If security keys are needed to access the data on the RFID tag, specify
Key A and/or Key B in ISO14443A Login Key .
2) Tap the green arrow next to Read / Write Block .
Read tab page opens with a blank test scan page to display the decoded data.
3) Place the RFID tag in proximity to the mobile computer’s back cover, where the RFID
reader module is installed.
4) Press the scan key (or side trigger) on the mobile computer. The RFID reader will scan
for RFID tags within reading range.