CipherLab CP55, Reference Manual

Page: 52 / 287

36
CP55 Mobile Computer Reference Manual
1.7.3. INSERT SD CARD
Day-to-day use of the mobile computer might cause the available internal storage to run
short. Equip the mobile computer with an external memory unit to expand storage capacity.
Follow the steps below to install a SD card:
1)
Power off the mobile computer.
2) Place the mobile computer face-down on a flat and soft surface.
3) Remove the battery door and main battery pack as described in Main Battery Setup .
4) Locate the SD card socket inside the battery chamber. (See Inside Battery Chamber .)
The SD card socket is equipped with a hinged cover.
5) Push the hinged cover to the “open”
position.
6) The hinged cover is unlocked.
7) Swivel up the hinged cover.
8) Insert the SD card into the cover slot
in the direction indicated . The
metal contact pins should face down.
9) Put down the hinged cover and push
it back to the “lock” position.
10) Restore the main battery pack and
battery door.
Figure 10: Inserting SD Card