CipherLab 9500 Series Page 137 Reference Manual Download

Page: 137 / 153

127

Appendix III

LR, ELR Laser

Convert RSS to

UPC/EAN

"Convert to UPC/EAN" only applies to GS1 Databar-14 and

GS1 Databar Limited barcodes not decoded as part of a

Composite barcode.

Convert to EAN-13

Strip the leading "010" from barcodes.

"01" is the Application ID and must be followed by a
single zero (the first digit encoded)

Convert to UPC-A

Strip the leading "0100" from barcodes.

"01" is the Application ID and must be followed by
two or more zeros (but not six zeros)

EAN-8

Enable

Convert to EAN-13

The EAN-8 barcode will be expanded into EAN-13, and the

next processing will follow the settings configured for

EAN-13.

Addon 2 / Addon 5

Refer to UPC/EAN Addon setting.

EAN-13

Enable

Bookland EAN (ISBN)

The EAN-13 barcode starting with 978 will be converted to

ISBN.

Yes

Addon 2 / Addon 5

Refer to UPC/EAN Addon setting.

UPC-A

Enable

Transmit Check Digit

Decide whether to include the UPC-A check digit in the

data being transmitted.

Yes

Transmit Preamble

Decide whether to include the UPC-A preamble System

Number (and Country Code) in the data being transmitted.

System

Number

Addon 2 / Addon 5

Refer to UPC/EAN Addon setting.

UPC-E0

Enable

Transmit Check Digit

Decide whether to include the UPC-E0 check digit in the

data being transmitted.

Yes

Transmit Preamble

Decide whether to include the UPC-E0 preamble System

Number (and Country Code) in the data being transmitted.

System

Number

Addon 2 / Addon 5

Refer to UPC/EAN Addon setting.

Convert to UPC-A

The UPC-E0 barcode will be expanded into UPC-A, and the

next processing will follow the settings configured for
UPC-A.

UPC-E1

Disable

Transmit Check Digit

Decide whether to include the UPC-E1 check digit in the

data being transmitted.

Yes

Transmit Preamble

Decide whether to include the UPC-E1 preamble System
Number (and Country Code) in the data being transmitted.

System
Number

Addon 2 / Addon 5

Refer to UPC/EAN Addon setting.

Summary of Contents for 9500 Series


























































































































































Search results

Summary of Contents for 9500 Series

Reviews:

Related manuals for 9500 Series

Brands by name

Popular brands

CipherLab 9500 Series, Reference Manual

Search results

Summary of Contents for 9500 Series

Reviews:

Related manuals for 9500 Series

Brands by name

Popular brands