CipherLab 2564MR, User Manual

Page: 58 / 283

2564MR Barcode Scanner User Guide
1.11 AUTO-SENSE MODE
Auto-sense is only available when the scanner is working in Laser Mode . The scanner will be
expecting barcodes as long as it is seated in the Auto-sense stand. Whenever a barcode is
brought within range, the scanner will be able to decode it.
To stop this mode, just remove the scanner from the stand.
*Enable
Disable
For your convenience, the scanner is designed to power on automatically in Auto-sense
mode when you seat it in the stand connecting to the power socket. By default, this
mechanism is disabled. You have to enable it by having the scanner read the Enable
barcode below.
Enable
*Disable
1.12 NEGATIVE BARCODES
Normally, barcodes are printed with the color of the bars darker than that of the spaces. But
for negative barcodes, they are printed in the opposite sense just like negative films. The
spaces of negative barcodes are printed with a color darker than that of the bars. You can
configure the scanner to be able to read negative barcodes in the following symbologies:
46
Enter Setup