CipherLab 1664, User Manual

Page: 260 / 267

249
Update
Appendix III Keyboard Wedge Table
EXAMPLE
KEY TYPE = NORMAL
For example, if you want to program the character “!” as the prefix code:
1. Read the “Configure Prefix” barcode.
2. Read the “ Hexadecimal Value ” barcode on page 252 for “2” and “1”.
3. Read the “Validate” barcode to complete this setting.
KEY TYPE = SCAN CODE
For example, if you want to program the character “a” (= “1C” on the scan code table) as the
prefix code:
1. Read the “Configure Prefix” barcode.
2. Read the “Scan Code” barcode.
3. Read the “ Hexadecimal Value ” barcode on page 252 for “1” and “C”.
4. Read the “Validate” barcode to complete this setting.
KEY TYPE = KEY STATUS = SHIFT
For example, if you want to program the character “!” (= “Shift” + “1” on keyboard) as the prefix
code:
1. Read the “Configure Prefix” barcode.
2. Read the “Add Shift” barcode.
3. Read the “ Hexadecimal Value ” barcode on page 252 for “3” and “1”.
4. Read the “Validate” barcode to complete this setting.
KEY TYPE = KEY STATUS = CTRL
For example, if you want to program “Ctrl+A” and “Ctrl+$” as the prefix code:
1. Read the “Configure Prefix” barcode.
2. Read the “Add Left Ctrl” barcode.
3. Read the “ Hexadecimal Value ” barcode on page 252 for “4”, “1” (= “A”).
4. Read the “Add Left Ctrl” barcode.
5. Read the “ Hexadecimal Value ” barcode on page 252 for “2”, “4” (= “$”).
6. Read the “Validate” barcode to complete this setting.