Cincoze MXM-P2000 Series, Quick Installation Manual

Page: 6 / 17

MXM
-
P2000 Series | Quick Installation Guide
6
Conventions Used in this Manual
Safety Precautions
Before installing and using this device, please note the following precautions.
1.
Read these safety instructions carefully.
2.
Keep this Quick Installation Guide for future reference.
3.
Disconnected this equipment from any AC outlet before cleaning.
4.
For plug-in equipment, the power outlet socket must be located near the equipment and
must be easily accessible.
5.
Keep this equipment away from humidity.
6.
Put this equipment on a reliable surface during installation. Dropping it or letting it fall
may cause damage.
7.
Make sure the voltage of the power source is correct before connecting the equipment
to the power outlet.
8.
Use a power cord that has been approved for using with the product and that it matches
the voltage and current marked on the product’s electrical range label. The voltage and
current rating of the cord must be greater than the voltage and current rating marked on
the product.
9.
Position the power cord so that people cannot step on it. Do not place anything over the
power cord.
10.
All cautions and warnings on the equipment should be noted.
11.
If the equipment is not used for a long time, disconnect it from the power source to avoid