Cincoze MXM-P2000 Series, Quick Installation Manual

Page: 14 / 17

MXM
-
P2000 Series | Quick Installation Guide
14
2.1 Install an MXM Module
This chapter is to demonstrate how to setup an MXM Module onto an MXM Module
supported system. Before this chapter gets started, users need to follow the instructions of
the system’s user manual to remove the system’s chassis cover and to install the MXM
carrier board.
1.
Locate the slot on the MXM carrier board installed on the MXM Module supported
system.
The system used here is GM-1000.
2.
Place the thermal pad on the chips of the MXM Module.
This slot is used to
connect
an MXM Module
An MXM carrier
board
installed
on
GM-1000