Cincoze CO-100/P2102 Series User Manual Download Page 12

Page: 12 / 102

100/P2102

Series | User Manual

1.1 Overview

Cincoze’s high

performance open

frame modular panel PCs (CO

W121C/P2102 Series) use Intel®

Core U series processors that provide high

performance data processing and graphics computing

capabilities with only 15W low power consumption. The CO

100/P2102 series supports CFM

technology that extends system functions according to requirements, with options such as Power

Ignition Sensing (IGN) and Power over Ethernet (PoE). The series has multiple sizes, display ratios

(4:3 and 16:9), and touchscreen options. Its integrated structure, exclusive adjustable mounting

bracket, and support for multiple mounting methods to perfectly fit cabinets of different materials

and thicknesses. The robust design also meets the application needs of harsh industrial

environments.

1.2 Highlights

Summary of Contents for CO-100/P2102 Series







































































































Search results

Summary of Contents for CO-100/P2102 Series

Reviews:

Related manuals for CO-100/P2102 Series

Brands by name

Popular brands

Cincoze CO-100/P2102 Series, User Manual

Search results

Summary of Contents for CO-100/P2102 Series

Reviews:

Related manuals for CO-100/P2102 Series

Brands by name

Popular brands