background image

  Service

  Parts & Accessories

15

14

To obtain service, contact ESCORT at  
1-800-543-1608 to obtain a Return 
Authorization Number. 

Properly pack your product and include: 
your name, complete return address, 
written description of the problem with 
your product, daytime telephone number 
and a copy of the original purchase 
receipt. Label the outside of the package 
clearly with your Return Authorization 
Number. 

Ship the product prepaid (insured, for 
your protection) to: 
RMA#_______________
ESCORT Inc.
5440 West Chester Road
West Chester OH 45069.

  Warranty

ESCORT One-Year Limited Warranty

ESCORT warrants your Laser ShifterPro 
device against all defects in materials and 
workmanship for a period of one (1) year 
from the date of the original purchase, 
subject to the following terms and 
conditions:
•  The sole responsibility of ESCORT 

under this warranty is limited to either 
repair or, at the option of ESCORT, 
replacement of Laser ShifterPro. There 
are no expressed or implied warranties, 
including those of fitness for a 
particular purpose or merchantability, 
which extend beyond the face hereof. 
Some states do not allow limitations on 
how long an implied warranty lasts, so 
the above limitations may not apply to 
you.

•  ESCORT is not liable for any incidental 

or consequential damages arising from 
the use or misuse of Laser ShifterPro. 
Some states do not allow the exclusion 
or limitation of incidental or 
consequential damages, so the above 
limitation or exclusion may not apply to 
you.

This warranty gives you specific rights. 
You may have other legal rights, which 
vary from state to state. This warranty 
does not apply if the serial number has 
been removed or if your Laser ShifterPro 
device has been subjected to physical 
abuse or modification.

Two (2) Additional ShifterPro Sensors 
w/Hardware

Extension Cable (6.6 ft)

Summary of Contents for Laser ShifterPro









Reviews: