CiDRA SMART HATCH, Installation & Operation Manual

Page: 9 / 46

21798-01-EN Rev. 04 Page 7
2
EQUIPMENT SAFETY COMPLIANCE
2.1 Safety
This equipment is listed with TÜV Rheinland of North America, Inc., a nationally
recognized testing laboratory, certified for ordinary location use per the following
US, Canadian and European standards:
UL/ 61010-1, CSA C22.2 No. 1010 and EN61010-1.
2.2 North American Emissions
This equipment is compliant with Class A limits for radiated and conducted radio
noise emissions, as defined in Subpart A of Part 15 of the FCC rules, as well as
the requirements defined in ICES-003 for Canada.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB- 003 du
Canada.
2.3 Radio Module (Hatch-Mounted Sensor, Receiver Module and
Telematics Module)
The radio modules in the sensor and receiver module are labeled with its own
FCC ID and IC Certification Number. The FCC ID and IC certification numbers
are not visible so a label referring to the enclosed module is provided. The final
end product must be labeled in a visible area with the following, “Unit Labeling”,
see below.
Any changes or modifications not expressly approved by CiDRA could void the
user’s authority to operate the equipment.
2.3.1 Unit Labeling: Sensor and Receiver Module
FCC ID: MCQ-S2CTH
IC 1846A-S2CTH
This device complies with Section 15.19(a) of the FCC Rules, and ICES-
003. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.