7 - MAINTENANCE/SERVICE INTERVALS
Switch off the electrical supply to the air handling unit before carrying out any work
Details of hinges/handles: Allen key locks, size 4
When they are unlocked, the handles are in "hinge" mode. It is possible to unlock a single row of handles to open like a conventional
door. If all of the handles are unlocked, the door can be removed.
Handle locked
Handle unlocked
Door
7.1 - FILTERS
After commissioning, the speed of filter fouling will depend on the care taken when cleaning the air flow circuits. Hence the frequency
of filter checks should be increased during this period.
Maintenance intervals
The filter life depends essentially on the amount of dust in the air and the efficiency of the filtration system. The filtration quality
cannot be maintained if the filter medium has been damaged during maintenance. We recommend that the filters be replaced once
every two years, even in the case of moderate use
Filter replacement method
During filter maintenance operations, it is important not to spread the dust that has accumulated in the filters.
Shut down the unit,
Access the filters by opening the door panels,
Simply pull on the filters
Pull the connecting runner (on Floway Classic PHE and RHE/RHE-Z ≥ 3000 m3/h models), then you can remove the filters. For
the other models, simply pull directly on the filters.
Example: Floway "Classic PHE"
Connecting runner
Filter
EN-33 FLOWAY
