95
28.7.10. SMTP Settings
This is used to configure the SMTP settings of the device.
SMTP Settings Page
LAN Interface:
Displays the list of LAN channels available.
Sender Email ID:
Enter the valid Sender Email ID on the SMTP Server.
Primary SMTP Support:
Check the box to enable SMTP support for the BMC.
Primary Server Name:
Enter the Machine Name of the SMTP Server.
Primary SMTP IP:
Enter the IP address of the SMTP Server
Primary SMTP Port:
Specify the SMTP Port.
Primary Secure SMTP Port:
Specify the SMTP Secure Port.
Primary SMTP Authentication:
Check the box to enable SMTP Authentication.
Primary Username:
Enter the username to access SMTP Accounts.
Primary Password:
Enter the password for the SMTP User Account.
Primary SMTP SSLTLS Enable:
Check the box to enable SMTP SSLTLS protocol
Primary SMTP STARTTLS Enable:
Check the box to enable SMTP STARTTLS protocol.
Upload SMTP CA Certificate File:
This field will be present if enable
SMTP SSLTLS
Enable
or
STARTTLS Enable,
the field is used to upload CACERT key file.
Upload SMTP Certificate File:
This field will be present if enable
SMTP SSLTLS Enable
or
STARTTLS Enable,
the field is used to upload CERT key file.
Upload SMTP Private Key:
This field will be present if enable
SMTP SSLTLS Enable
or
STARTTLS Enable,
the field is used to upload SMTP key file.
Secondary SMTP Support:
Check the box to enable secondary SMTP support for the BMC.
Summary of Contents for ORION HF210-G5
