MetCam Technical Manual
Document P/N A1604870010
9
4.2.2
Installing the Tilt Mount
The MetCam tilt mount can be connected to a horizontal surface (from below or above), to a vertical surface or a 2" post.
For convenience, it is recommended to first connect the tilt mount to the surface and then connect MetCam to it
The tilt mount is not symmetrical, make sure to install it in the correct orientation.
Note that the tilt mount does not include a pan degree of freedom so it is important to align it to the monitored area when
connecting to the surface/post. The horizontal field of view (FOV) of MetCam is ~70 degrees so fine alignment is not
required.
MetCam mounted on top of a
horizontal surface
MetCam mounted to a vertical
surface/post
MetCam mounted hanging from a
horizontal surface
The tilt mount interface is shown in the following figures:
