Chyron infinit! series, Operation Manual

Page: 940 / 978

CHYRON Corporation
Total Motion Control 23-44 Revision D
The CMF execution cannot be continued from this point.
To resume Play List execution with the next Play List
entry:
• Press
READ NEXT
.
The CMF is always read into the Foreground buffer of
the Extended Effects Frame Buffer.
0XOWL(IIHFWV&0)-3(*2SHUDWLRQV
A CMF animation or JPEG file can be executed in con-
junction with Multiple Effects. Remember that the SCSI
Express drive path must be set up in Message Compose
(
SET-UP E
) so that Multiple Effects knows where to find
the CMF animation or JPEG file. Additionally, any SCSI
Express file specified in a Multiple Effects setup, must be
stored on the drive and in the directory specified in SCSI
Express setup. See §23.3.4 for details.
0XOWL(IIHFWV6HWXS
To set up a CMF or JPEG in Multiple Effects:
[ ] 1. Select the buffer in which to execute the CMF
or JPEG.
[ ] 2. Using the alphanumeric keyboard, enter the
CMF animation or JPEG file ID number in the
Mesg
column.
[ ] 3. Select
CMF
or
JPEG
in the
Type
column.
NOTE
Do not attempt to run a CMF
animation and a JPEG file in the
same Multiple Effects execution.
Even if there is more than one SCSI
Express drive on the system, there
is only one SCSI Express driver.