manualshive.com logo in svg

Chyron infinit! series, Operation Manual

Share
Download
Chyron infinit! series Operation Manual Download Page 866

CHYRON Corporation

RGB Tools

21-24

Revision D

 )UDPH%XIIHUV%

This function can be executed only on systems equipped 
with two or more frame buffers, and is not available from 
within IMAGESTOR!

The 

Frame Buffers

 function combines RGB and alpha 

for images in the frame buffers assigned to CHANNELS 
A, B and the PREVIEW CHANNEL, and then writes the 
combined information into the currently active frame 
buffer.  Buffers are merged as specified in the Mix menu.

To perform a Frame Buffer Merge:

[   ]  1.

From the Merge Control menu (Figure 21-13),
press 

B

 or select 

Frame Buffers

.  The Merge

Frame Buffers menu is displayed.

Figure 21-14.  Merge Frame Buffers Menu

[   ]  2.

Transparency can be set one of two ways:

•

The buffers assigned to CHANNELS A 
and B display at 100% video.

•

The Output Percentage set in the Mix Set-
tings window in the Mix or Multiple 
Effects menu (§16.7 or §17.5 respectively) 
are used.

NOTE:

  The buffer assigned to the PREVIEW

CHANNEL always displays as 100% video.

If the 

Transparency

 icon is not highlighted

(default), the Mix Output Percentage settings

Summary of Contents for infinit! series



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands