Chyron infinit! series, Operation Manual

Page: 742 / 978

CHYRON Corporation
Font Create Utility 18-10 Revision D
• While in the
EDGE TYPE
field, type the first letter
of the Edge Type, then press or cursor to the next
field.
If you choose NO EDGE , the EDGE DIR and EDGE SIZE
fields become unavailable. If you choose
BORDER
, the
EDGE DIR field becomes unavailable.
('*(',5(GJH'LUHFWLRQ
Eight Edge Directions are available to SHADOW , OFF-
SET
, or
COMBINED
Edge Types: 1 -
LOW LT
(lower
left), 2 - DOWN , 3 - LOW RT (lower right), 4 - LEFT , 6 -
RIGHT
, 7 -
UP LT
(upper left), 8 -
UP
, and 9 -
UP RT
(upper right).
To choose an Edge Direction:
• While in the EDGE DIR field, press the SPACE BAR
to toggle through the above choices, then press or
cursor to the next field.
OR...
• While in the EDGE DIR field, type the corresponding
number assigned to the Edge Direction using the
Address Keypad. Note that there is no Edge Direc-
tion assigned to number 5.
Figure 18-6. Edge Direction
1
2
3
4 6
7
8
9