Chyron infinit! series, Operation Manual

Page: 649 / 978

iNFiNiT! Family Operation Manual
Revision D 15-53 Advanced Read FX
5HDG7ZR)UDPH%XIIHUV
These messages contain text in the topmost buffer, and
RGB graphics in the next available buffer. To read a two
buffer Text & Graphics message into CHANNELS A and
B, for example:
[ ] 1. Set the active frame buffer to the one that is
assigned to CHANNEL A.
NOTE
If the active buffer is not reset to the
one that was assigned to the
topmost CHANNEL (A) when Read
is executed, the text will read into
the currently active buffer, and the
graphics will read into the next
available buffer. This could produce
unpredictable results.
[ ] 2. Press
CLR
, then enter the message ID number
using the Address Keypad.
[ ] 3. Press READ .
NOTE
If you read a Single Buffer EEFB
message while the Single EEFB
Text & Graphics Message feature is
not activated, the results can be
unpredictable. Always preview an
operation of this type.
Information on this function can also be found in §8.5.15.
5HDG6LQJOH(()%0RGH
Text & Graphics are separately recorded in the Fore-
ground and Background of one EEFB. Output Percent-
age levels are independently set for the Foreground and
Background.