Chyron infinit! series, Operation Manual

Page: 541 / 978

iNFiNiT! Family Operation Manual
Revision D 13-51 Flash Font
2EMHFW
This area controls the rotation angle, size of character,
location, thickness, and perspective of the object being
converted.
/LJKW
This area of the 3D Utility window controls the position
and amount of reflected and ambient light that strikes an
object. Two light sources are available.
Rotate X, Y, or Z
•
Move the cursor to a field and use SHIFT
CHAR +
Ì
or
Í
to do interactive rotations.
You can also enter a value directly: Type a
number while the field is highlighted, then
press
. Rotations are shown on the Edit
Monitor, both by the orientation arrow and the
wireframe image.
Depth:
Depth: is thickness of the object, in scanlines.
•
Highlight Depth: then enter a value from 0 to
200
.
A change in thickness is reflected in the blue por-
tion of the wireframe. Default is the thickness of
the object upon entry to the 3D Utility, usually
40
.
Eye Dist: The Eye Dist: (Eye Distance - perspective) field
changes how far the front of the object is from a
vanishing point in Z-space. Decrease for greater
perspective effect; increase for less effect. Very
high numbers are allowed, but values over
1000
typically have little additional effect. The mini-
mum also varies. A warning message is displayed
when the eye gets too “close” to the object.
Size: Size is the object size in scanlines. Upon entry to
3D mode, the size defaults to the value shown in
the On-Line main menu, typically 1
24
.