Chyron infinit! series, Operation Manual

Page: 503 / 978

iNFiNiT! Family Operation Manual
Revision D 13-13 Flash Font
This concludes the Flash Font tutorial. Further informa-
tion about these features appears later in this section.
)ODVK)RQW:LQGRZ
The parameters for each of the following functions can
be set using the methods described in §13.3. Select or
highlight the item before making any changes.
The
Address Keypad cannot be used to enter negative
values.
)RQW6L]H
Font Size
can be set to a height from
6
to
1000
(or what-
ever size is allowed by available system RAM during
conversion) scanlines. Default
Font Size
is
10
.
Additional
functions Additional functions are as follows:
• Press
D
or select
Change Dir
to change current
Machine Font directory.
• Press
L
or select
List
to list all Machine Fonts stored in
current directory
•
Convert
, and
Quit
(both described below).
Quit or
Convert • Press
Q
or select
Quit
to exit this menu without convert-
ing a Machine Font.
• Press
C
or select
Convert
to begin the conversion.
Conversion time depends on the specific font size and char-
acteristics, but usually is finished in under a minute.