e
d
o
m
M
A
e
d
o
m
M
F
6.3 Using the Alarm and Snooze
● Set the desired alarm time as described in
5.2
.
● Slide the
[ ALARM ON/OFF/ ALARM RADIO ]
slide switch to
<ALARM ON>
or
< ALARM RADIO >
position.
● When the clock reaches the alarm time, alarm sound will start.
It can be stopped by following operation:
For
<ALARM ON>
position:
● Auto-stop after 1 minute alarming if without any operation and it will re-alarm
by the next day.
● Press
[ SNOOZE/LIGHT ]
key to enter snooze, and the alarm will turn on
with “
beep
” sound after 5 minutes.
● Slide the
[ ALARM ON/OFF/ ALARM RADIO ]
switch to
<OFF>
position
to turn off the alarm function.
For
<ALARM RADIO >
position:
● Auto-stop after 30 minutes alarming if without any operation and it will re-alarm
by the next day.
● Press
[ SNOOZE/LIGHT ]
key to enter snooze, and the alarm will turn on
with radio sound after 5 minutes.
● Slide the
[ ALARM ON/OFF/ ALARM RADIO ]
switch to
<OFF>
position
to turn off the alarm function.
NOTE:
● The snooze can be used continuously in 24 hours.
● During the alarm and snooze, the alarm icon “ ” will keep flashing.
7.RADIO OPERATION-AM & FM MODE
7.1 Power on Radio
● Press and hold
[ RADIO ON/OFF]
key for 0.5 second to turn on the radio.
● Press
[ AM/FM ]
key to select AM mode or FM mode.
● Press
[ CH+ ]
/
[ CH- ]
key to select your favorite station, and press
[ VOL+]
/
[ VOL- ]
key to adjust the volume of your radio.
● Press and hold
[ RADIO ON/OFF]
key for 0.5 second again to turn off the
radio.
NOTE:
● In FM mode, the frequency will increase/decrease 0.05 MHz by every press of
[ CH+ ]
/
[ CH- ]
key.
● In AM mode, the frequency is factory set to increase/decrease 9 kHz by every press
of
[ CH+ ]
/
[ CH- ]
key for DCF / MSF / JJY version, but increase/decrease 10 kHz for
WWVB version.
● Press
[ AM/FM ]
and
[ RESET ]
key at the same time to reset the radio, the changing
frequency of AM mode will switch between 9 kHz and 10 kHz for all of the versions.
7.2 Auto Scanning
● In AM/FM mode, you can press and hold
[ CH+ ]
/
[ CH- ]
key to enter
auto-scan mode and the radio will search station automatically.
● The radio will not stop searching until it searches a station.
NOTE:
●
Once the radio searches a station, it will broadcast the station automatically.
8. DIRECT MEMORY STATION
When you listen to a station on AM/FM, press and hold the
Memory([ M1]/
