Year setting
e
n
o
z
e
m
i
T
e
d
o
m
e
m
i
t
l
a
m
r
o
N
Language setting
Second setting
g
n
i
t
t
e
s
e
t
a
D
g
n
i
t
t
e
s
e
t
u
n
i
M
12/24 Hour format setting
Hour setting
Month setting
Minute setting
Hour setting
batteries are inserted with the correct polarity as shown inside the battery
compartment. Replace the battery door.
● Press
[ RESET ]
key to reset the unit.
● If using DC adaptor to power the unit, plug the DC adaptor into the DC
jack, and connect another end of the adaptor to the main power.
● Once you power/repower the clock, all the segment of the LCD will be
shown for 2 seconds and turn to time mode.
NOTE:
● The
initial time is12:00 am when you use the clock first time, or repower the clock.
●
The signal reception will last for about 6~16 minutes.
●
The AM/FM radio may consume more power, so you can use the main power
when you use the radio, and use the batteries to retain the clock.
5. DAYLIGHT SAVING TIME (DST)
The clock has been programmed to automatically switch when daylight
saving time is in effect. Your clock will display “
DST
” on the LCD during the
summer.
6. CLOCK OPERATION
6.1 Time and Calendar Setting
If the clock does not receive the time signal successfully, you can set the time
manually. As soon as the transmitter is received, the clock will automatically
synchronize with the received time.
● Press and hold
[ TIME SET ]
key for 2 seconds to enter time setting
mode with Time Zone digit flashing. (WWVB version only)
● Press
[ UP ]
/
[ DOWN ]
key to adjust the value of flashing digit.
● Press
[ TIME SET ]
key to step to Year setting, and press
[ UP ]
/
[ DOWN ]
keyto adjust it.
Setting sequence will be: Time zone>Year>Month>Date>12/24 Hr format>
Hour>Minute>Second>Day Language.
● Press
[ TIME SET ]
key to save and exit setting.
6.2 Alarm Time Setting
● Press and hold
[ ALARM SET ]
key for 2 seconds to enter alarm time
setting mode with Hour digit flashing.
● Press
[ UP ]
/
[ DOWN ]
key to adjust the value flashing digit. (Press the
key without releasing to speed up adjusting)
● Press
[ ALARM SET ]
key to step to Minute setting. Press
[ UP ]
/
[ DOWN ]
key to adjust the value of Minute.
● Press
[ ALARM SET ]
key to save and exit setting.
