RC-80
User Manual
Wireless Remote
Control
The remote control enables you to turn the alarm system on
and off before entering the home or after exiting. If there is
an emergency, press SOS button on the remote control to
trigger the panel. RC-80, compact and portable, is designed
to fit on a keychain, in a pocket, or in a purse.
Introduction
LED Indication
LED flashes once:
sends the transmitting signal.
Low battery, please replace the battery
Dim light:
immediately.
Overview
Disarm
Panic
Stay
Arm
LED Indicator
Specifications
Power supply
DC 3V (CR2025 Lithium Battery x 1pc)
≤ 7mA
Working current
≤ 80m (in open area)
Transmitting distance
315MHz or 433.92MHz (± 75KHz)
Radio frequency
ABS plastic
Housing material
Operation Condition
Temperature
-10°C ~ +55°C
Relative humidity
≤80% (non-condensing)
58 x 31 x 9.5mm
Dimensions (L x W x H)
Arm
Stay/
Home Mode
Panic
Mute Arm
Mute Disarm
Disarm
Press to arm the alarm panel and all of the accessories.
(Away Mode)
Press to disarm the alarm system.
Press to arm all sensors except the ones in zone A or Home Mode Zone,
sensors in zone A or Home Mode Zone will not activate an alarm.
Press to activate a panic alarm and the control panel auto-dials
the pre-set phone numbers immediately.
Press to arm the system in mute.
Press to disarm the system in mute.
Usage
Ver : RC-80-UM-EN-V1.0
2015 Chuango. All Rights Reser ved.
Declaration of Conformity
We declare on our sole responsibility that this equipment complies with the essential requirements of the Radio and
Telecommunications Terminal Equipment Directive, 1999/5/EC, and that any applicable Essential Test Suite measurements have
been performed.
CE versions of the
ntrol (M/N:
) which display the CE symbol on the product label, comply with the
Wireless Remote Co
RC-80
essential requirements of the European Radio and Telecommunication Terminal Directive 1999/5/CE.
2200
