Chrysler Pacifica Hybrid 2020 Owner'S Manual Download Page 88

Page: 88 / 108

Maintenance Plan

Required Maintenance Intervals

Refer to the maintenance schedules on the following page for the required maintenance intervals.

At Every Oil Change Interval As Indicated By Oil Change Indicator System:



Change oil and filter



Rotate the tires



Rotate at the first sign of irregular wear, even if it occurs before the oil indicator system turns on



Inspect 12 volt battery and clean and tighten terminals as required



Inspect the CV/Universal joints



Inspect brake pads, shoes, rotors, drums, hoses and park brake



Inspect engine cooling system protection and hoses



Inspect exhaust system



Inspect engine air cleaner if using in dusty or off-road conditions

2020_CHRYSLER_PACIFICA_HYBRID_SUPP_USA=GUID-876DAAE8-C65F-4BC7-BAA9-813BB1426F1D=1=en=.book Page 86

Summary of Contents for Pacifica Hybrid 2020













































































































Search results

Summary of Contents for Pacifica Hybrid 2020

Reviews:

Chrysler Pacifica Hybrid 2020, Owner'S Manual, Page: 88 / 108

Search results

Summary of Contents for Pacifica Hybrid 2020

Reviews: