Chrysler Pacifica Hybrid 2018 Owner'S Manual Download Page 519

Page: 519 / 617

UCONNECT RADIOS

For detailed information about your Uconnect radio, refer
to your Uconnect Owner’s Manual Supplement.

NOTE:

Uconnect screen images are for illustration pur-

poses only and may not reflect exact software for your
vehicle.

PERSONALIZED MENU BAR

The Uconnect features and services in the main menu bar
are easily changed for your convenience. Simply follow
these steps:

1. Press the “Apps

” button to open the App screen.

2. Press and hold, then drag the selected App to replace an

existing shortcut in the main menu bar.

The new shortcut will now be an active App/shortcut on
the main menu bar.

Personalized Menu Bar

MULTIMEDIA

517

Summary of Contents for Pacifica Hybrid 2018










































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Pacifica Hybrid 2018

Reviews:

Chrysler Pacifica Hybrid 2018, Owner'S Manual, Page: 519 / 617

Search results

Summary of Contents for Pacifica Hybrid 2018

Reviews: