Chrysler Pacifica 2021 Owner'S Manual Download Page 165

Page: 165 / 432

STARTING AND OPERATING

163



Stop/Start OFF switch is pushed.



Stop/Start related system malfunction.

ANUALLY

URN

TOP

TART

YSTEM

Stop/Start OFF Button

Push the Stop/Start OFF switch (located on the

switch bank). The light on the switch will

illuminate. The “STOP/START OFF” message

will appear in the instrument cluster display and

the autostop mode will be disabled

page 134.

NOTE:

The Stop/Start system will reset itself back to

the ON mode every time the ignition is turned

OFF and back ON.

ANUALLY

URN

TOP

TART

YSTEM

After turning off the Stop/Start system, push

the Stop/Start OFF switch again (located on the

switch bank). The light on the switch will turn

off.

YSTEM

ALFUNCTION

If there is a malfunction in the Stop/Start

system, the system will not shut down the

engine. A “SERVICE STOP/START SYSTEM”

message will appear in the instrument cluster

display and the Stop/Start telltale will remain

yellow

page 121.

If the “SERVICE STOP/START SYSTEM”

message appears in the instrument cluster

display, have the system checked by an

authorized dealer.
If a malfunction occurs during an autostop, the

vehicle may not auto start and will need a key

start.

CRUISE CONTROL SYSTEMS — IF EQUIPPED

Your vehicle may be equipped with the Cruise

Control system, or the Adaptive Cruise Control

(ACC) system:



Cruise Control for cruising at a constant

preset speed.



Adaptive Cruise Control (ACC) for maintaining

a set distance between you and the vehicle

ahead using Fixed Speed Cruise Control to

automatically adjust the preset speed.

NOTE:

In vehicles equipped with ACC, if an ACC

distance is not set, Fixed Speed Cruise Control

will not detect vehicles directly ahead of you.

Always be aware of the mode selected.

21_RUP_OM_EN_USC_t.book Page 163

Summary of Contents for Pacifica 2021

















































































































































































































































































































































































































































Search results

Summary of Contents for Pacifica 2021

Reviews:

Chrysler Pacifica 2021, Owner'S Manual, Page: 165 / 432

Search results

Summary of Contents for Pacifica 2021

Reviews: