Chrysler Grand Caravan 2022 Owner'S Manual Download Page 28

Page: 28 / 316

GETTING TO KNOW YOUR VEHICLE

To Engage The Child Protection Door Lock
1. Open the sliding side door.
2. On the rear of the sliding door, slide the Child

Protection Door Lock control inward (toward

the vehicle) to engage the Child Protection

Door Lock.

Child Protection Door Locks

3. Repeat Steps 1 and 2 on the opposite sliding

door.

NOTE:



After engaging the Child Protection Door Lock,

always test the inside door handle with the

sliding door closed to make certain the Child

Protection Door Lock is in the locked position.



After disengaging the Child Protection Door

Lock, always test the inside door handle with the

sliding door closed to make certain the Child

Protection Door Lock is in the unlocked position.



The inside door handle will not open the sliding

door when the Child Protection Door Lock is

engaged.



The power sliding door will operate from the

switch located just inside the sliding door,

regardless of the Child Protection Door Lock

lever position.



To avoid unintentional operation of the power

sliding door from the rear seats, push the

Sliding Door Power Off button, located in the

overhead console. When the overhead console

power OFF LED is lit, the sliding door may not be

power opened or closed when pushing the

buttons just inside the sliding doors, or when

pulling on the handles.

To Disengage The Child Protection Door Lock
1. Open the sliding side door.
2. Slide the Child Protection Door Lock control

outward (away from the vehicle) to disengage

the Child Protection Door Lock.

3. Repeat Steps 1 and 2 on the opposite sliding

door.

NOTE:

After disengaging (or engaging) the Child

Protection Door Lock, always test the inside door

handle with the sliding door closed to make certain

the Child Protection Door Lock is in the desired

position. The inside door handle will open the

sliding door when the Child Protection Door Lock is

disengaged.

STEERING WHEEL

ILT

ELESCOPING

TEERING

OLUMN

This feature allows you to tilt the steering column

upward or downward. It also allows you to lengthen

or shorten the steering column. The tilt/

telescoping lever is located left of the steering

wheel at the end of the steering column.

WARNING!

Avoid trapping anyone in the vehicle in a

collision. Remember that the sliding doors

cannot be opened from the inside door handle

when the Child Protection Door Locks are

engaged.

22_RUVG_OM_EN_USC_t.book Page 26

Summary of Contents for Grand Caravan 2022





























































































































































































































































































































Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands

Chrysler Grand Caravan 2022, Owner'S Manual

Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands