Chrysler Grand Caravan 2022 Owner'S Manual Download Page 139

Page: 139 / 316

STARTING AND OPERATING

137

RECREATIONAL TOWING (BEHIND MOTORHOME)

OWING

HIS

EHICLE

EHIND

NOTHER

EHICLE

NOTE:



To avoid inadvertent Electric Park Brake (EPB)

engagement, you must ensure that the Auto

Park Brake feature is disabled before towing

this vehicle (if rear wheels are on the ground).

The Auto Park Brake feature is enabled or

disabled via the customer programmable

features

page 141.



When towing your vehicle, always follow appli

cable state and provincial laws. Contact state

and provincial Highway Safety offices for addi

tional details.



If your vehicle is disabled and in need of

commercial towing service, for further informa

tion

page 240.

DO NOT flat tow this vehicle. Damage to the

drivetrain will result.

Recreational Towing
Front-Wheel Drive (FWD) Models
Recreational towing is allowed ONLY if the front

wheels are OFF the ground. This may be

accomplished using a tow dolly (front wheels off

the ground) or vehicle trailer (all four wheels off the

ground). If using a tow dolly, follow this procedure:
1. Properly secure the dolly to the tow vehicle,

following the dolly manufacturer's

instructions.

2. Drive the front wheels onto the tow dolly.
3. Apply the parking brake.
4. Place the transmission in PARK.
5. Turn the ignition OFF.
6. Properly secure the front wheels to the dolly,

following the dolly manufacturer's instructions.

Towing Condition

Wheel OFF The Ground

FWD Models

Flat Tow

NONE

NOT ALLOWED

Dolly Tow

Front

Rear

NOT ALLOWED

On Trailer

ALL

CAUTION!



DO NOT flat tow this vehicle. Damage to the

drivetrain will result. If this vehicle requires

towing, make sure the drive wheels are OFF

the ground.



Ensure that the EPB is released, and remains

released, while being towed.



Towing this vehicle in violation of the above

requirements can cause severe transmission

damage. Damage from improper towing is not

covered under the New Vehicle Limited

Warranty.

22_RUVG_OM_EN_USC_t.book Page 137

Summary of Contents for Grand Caravan 2022





























































































































































































































































































































Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands

Chrysler Grand Caravan 2022, Owner'S Manual

Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands