6
Directed Digital Solutions CHRYSLER13
© 2016-07-12 Directed. All rights reserved.
Wiring connections
The wiring connections listed below are specific to this firmware.
Main power harness (H1), 12-pin thick gauge connector
Conn./Pin
Color
Description
H1/1
White
Relay 3 COM – No Connection
1
H1/2
White/Brown
Relay 3 N.O. – No Connection
1
H1/3
Brown/Red
Relay 2 N.O.– (+) 12 Volt (Battery)
H1/4
Yellow/Red
Relay 2 COM – (+) Accessory Output
H1/5
Orange/Red
Relay 2 N.C. – No Connection
H1/6
Yellow
Relay 1 COM – (-) Lock Input
1
H1/7
White
Relay 3 COM – No Connection
1
H1/8
White/Brown
Relay 3 N.O. – No Connection
1
H1/9
Black
(-) Ground
H1/10
Red
(+) 12 Volt (Battery)
H1/11
Orange/Yellow
Relay 1 N.C. – No Connection
1
H1/12
Brown
Relay 1 N.O. – (-) Lock Output
Auxiliary output harness (H2), 16-pin black connector
Conn./Pin
Color
Description
H2/1
Violet/Brown
No Connection
H2/2
Yellow/Black
No Connection
H2/3
Orange/Black
No Connection
H2/4
Tan
HS CAN Low
H2/5
Tan/Black
HS CAN High
H2/6
Light Green
No Connection
H2/7
Orange/Green
MS CAN High
H2/8
Orange/Brown
MS CAN Low
H2/9
Violet/Green
No Connection
H2/10
Green/Black
No Connection
2
H2/11
White/Violet
No Connection
2
H2/12
White/Red
(+) Ignition Output
2
H2/13
Lt. Blue/Black
(-) Parking Lights Output
2
H2/14
Green/Red
(+) Starter Output
2
H2/15
N/A
No Connection
H2/16
Violet/Yellow
No Connection
1. If these outputs are not used by the firmware, they can be configured by the installer when the module is flashed.
2. If these outputs are not used by the firmware, they can be configured by the installer when the module is flashed. Note that they are low current and a relay
may be necessary.
