manualshive.com logo in svg

Chrysler 300 SRT8 2013, Owner'S Manual

The 2013 Chrysler 300 SRT8 is a powerful and luxurious vehicle that demands attention on the road. To help you make the most of your ownership experience, we offer a comprehensive and detailed Owner's Manual for free download on our website. Explore the exceptional features and capabilities of the Chrysler 300 SRT8 with our user-friendly manual, available at manualshive.com.

Share
Download
background image

To decrease speed while the Electronic Speed Control is
set, push the SET (-) button. If the button is continually
held in the SET (-) position, the set speed will continue to
decrease until the button is released. Release the button
when the desired speed is reached, and the new set speed
will be established.

Pressing the SET (-) button once will result in a 1 mph
(1.6 km/h) decrease in set speed. Each subsequent tap of
the button results in a decrease of 1 mph (1.6 km/h).

To Accelerate For Passing

Press the accelerator as you would normally. When the
pedal is released, the vehicle will return to the set speed.

Using Electronic Speed Control On Hills

The transmission may downshift on hills to maintain the
vehicle set speed.

NOTE:

The Electronic Speed Control system maintains

speed up and down hills. A slight speed change on
moderate hills is normal.

On steep hills, a greater speed loss or gain may occur so
it may be preferable to drive without Electronic Speed
Control.

WARNING!

Electronic Speed Control can be dangerous where the
system cannot maintain a constant speed. Your ve-
hicle could go too fast for the conditions, and you
could lose control and have an accident. Do not use
Electronic Speed Control in heavy traffic or on roads
that are winding, icy, snow-covered or slippery.

214

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 300 SRT8 2013




















































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 300 SRT8 2013

Valeo SC400 Operating Instructions Manual preview
SC400
Brand: Valeo Pages: 17
Camcar 40104 Mounting Instructions preview
40104
Brand: Camcar Pages: 6
Yamaha Yamaha Rhino 660 Instruction Supplement preview
Yamaha Rhino 660
Brand: Yamaha Pages: 3
Toyota 2011 Corolla LE Brochure preview
2011 Corolla LE
Brand: Toyota Pages: 19
GMC ANDROID INTERFACE Instruction Manual preview
ANDROID INTERFACE
Brand: GMC Pages: 18
Prorack K496 Fitting Instructions For Basic Carrier preview
K496
Brand: Prorack Pages: 15
Camcar 40108 Mounting Instructions preview
40108
Brand: Camcar Pages: 6
ABL eMH3 Quick Start Manual preview
eMH3
Brand: ABL Pages: 4
BMW E39/2 Installation Instructions Manual preview
E39/2
Brand: BMW Pages: 21
minnid 1.240.344 Operating Instructions Manual preview
1.240.344
Brand: minnid Pages: 44
Webasto CC4E Installation And Service Instructions Manual preview
CC4E
Brand: Webasto Pages: 34
Mercedes-Benz 2016 SLK Operator'S Manual preview
2016 SLK
Brand: Mercedes-Benz Pages: 358
Cadillac STS 2011 Owner'S Manual preview
STS 2011
Brand: Cadillac Pages: 529
Toro 07389 Installation Instructions Manual preview
07389
Brand: Toro Pages: 16
Gentex ADVGEN20A Manual preview
ADVGEN20A
Brand: Gentex Pages: 2
Volvo V70 2014 Quick Manual preview
V70 2014
Brand: Volvo Pages: 16
G-Tech Pro Competition User Manual preview
Pro Competition
Brand: G-Tech Pages: 180
Audiovox Auto Security AA-9103N Installation Manual preview
Auto Security AA-9103N
Brand: Audiovox Pages: 1

Brands by name

Popular brands

Load more brands