Chrysler 300 2021 Owner'S Manual Download Page 17

Page: 17 / 312

GETTING TO KNOW YOUR VEHICLE

The system uses a key fob, keyless push button

ignition and a Radio Frequency (RF) receiver to

prevent unauthorized vehicle operation.

Therefore, only key fobs that are programmed

to the vehicle can be used to start and operate

the vehicle. The system cannot reprogram a key

fob obtained from another vehicle.
After placing the ignition switch in the ON/RUN

position, the vehicle security light will turn on for

three seconds for a bulb check. If the light

remains on after the bulb check, it indicates

that there is a problem with the electronics. In

addition, if the light begins to flash after the

bulb check, it indicates that someone

attempted to start the engine with an invalid key

fob. In the event that a valid key fob is used to

start the engine but there is an issue with the

vehicle electronics, the engine will start and

shut off after two seconds.
If the vehicle security light turns on during

normal vehicle operation (vehicle running for

longer than 10 seconds), it indicates that there

is a fault in the electronics. Should this occur,

have the vehicle serviced as soon as possible by

an authorized dealer.

All of the key fobs provided with your new

vehicle have been programmed to the vehicle

electronics

page 298.

IGNITION SWITCH

EYLESS

NTER

-N-G

— I

GNITION

This feature allows the driver to operate the

ignition switch with the push of a button as long

as the key fob is in the passenger compartment.
The START/STOP ignition button has several

operating modes that are labeled and will

illuminate when in position. These modes are

OFF, ACC, ON/RUN, and START.

START/STOP Ignition Button

The push button ignition can be placed in the

following modes:
OFF



The engine is stopped.



Some electrical devices (e.g. central locking,

alarm, etc.) are still available.

CAUTION!

The Sentry Key Immobilizer system is not

compatible with some aftermarket remote

starting systems. Use of these systems may

result in vehicle starting problems and loss of

security protection.

1 — OFF
2 — ACC
3 — ON/RUN

21_LX_OM_EN_USC_t.book Page 15

Summary of Contents for 300 2021

























































































































































































































































































































Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands

Chrysler 300 2021, Owner'S Manual

Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands