Chrysler 300 2021 Owner'S Manual Download Page 111

Page: 111 / 312

STARTING AND OPERATING

109

To Accelerate For Passing

Press the accelerator as you would normally.

When the pedal is released, the vehicle will

return to the set speed.

Using Cruise Control On Hills

The transmission may downshift on hills to

maintain the vehicle set speed.
The Cruise Control system maintains speed up

and down hills. A slight speed change on

moderate hills is normal. On steep hills, a

greater speed loss or gain may occur so it may

be preferable to drive without Cruise Control.

To Resume Speed

To resume a previously set speed, push the RES

button and release. Resume can be used at any

speed above 20 mph (32 km/h).

To Deactivate

A tap on the brake pedal, pushing the CANC

button, or normal brake pressure will deactivate

the Cruise Control system without erasing the

set speed from memory.
The following conditions will also deactivate the

Cruise Control without erasing the set speed

from memory:



Vehicle parking brake is applied



Stability event occurs



Gear selector is moved out of DRIVE



Engine overspeed occurs

Pushing the on/off button or placing the ignition

in the OFF position erases the set speed from

memory.

DAPTIVE

RUISE

ONTROL

(ACC) —

QUIPPED

Adaptive Cruise Control (ACC) increases the

driving convenience provided by Cruise Control

while traveling on highways and major

roadways. However, it is not a safety system

and not designed to prevent collisions. The

Cruise Control function performs differently

page 107.

ACC will allow you to keep Cruise Control

engaged in light to moderate traffic conditions

without the constant need to reset your Cruise

Control. ACC utilizes a radar sensor and a

forward facing camera designed to detect a

vehicle directly ahead of you.

NOTE:



If the ACC sensor detects a vehicle ahead,

ACC will apply limited braking or acceleration

(not to exceed the original set speed) auto

matically to maintain a preset following

distance, while matching the speed of the

vehicle ahead.

WARNING!

Cruise Control can be dangerous where the

system cannot maintain a constant speed.

Your vehicle could go too fast for the

conditions, and you could lose control and

have an accident. Do not use Cruise Control

in heavy traffic or on roads that are winding,

icy, snow-covered or slippery.

21_LX_OM_EN_USC_t.book Page 109

Summary of Contents for 300 2021

























































































































































































































































































































Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands

Chrysler 300 2021, Owner'S Manual

Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands