Chrysler 300 2017 Owner'S Manual Download Page 198 | Manualshive

Page: 198 / 488

background image

Rear Seat Armrest Storage — If Equipped

For rear passengers there is a storage bin located in the
armrest. Lift upward on the latch to open the storage
compartment.

Cargo Area — Vehicles Equipped With 60/40
Split-Folding Rear Seat

The 60/40 split-folding rear seat provides cargo-carrying
versatility. The seatbacks fold down easily by pulling nylon
tabs between the seatbacks and the bolsters. When the seats
are folded down, they provide a continuous, nearly-flat
extension of the load floor.

When the seatback is folded to the upright position, make
sure it is latched by strongly pulling on the top of the
seatback above the seat strap.

WARNING!

•

Be certain that the seatback is securely locked into
position. If the seatback is not securely locked into
position, the seat will not provide the proper stabil-
ity for child seats and/or passengers. An improperly
latched seat could cause serious injury.

•

The cargo area in the rear of the vehicle (with the rear
seatbacks in the locked-up or folded down position)
should not be used as a play area by children when
the vehicle is in motion. They could be seriously
injured in a collision. Children should be seated and
using the proper restraint system.

•

To help protect against personal injury, passengers
should not be seated in the rear cargo area. The rear
cargo space is intended for load carrying purposes
only, not for passengers, who should sit in seats and
use seat belts.

(Continued)

Rear Armrest Storage

196

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

«
...
196
197
198
199
200
...
»

Summary of Contents for 300 2017









































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 300 2017

iBoard IB-ZK406

Brand: APS Auto Parts Specialist Pages: 3

Brand: B-Speech Pages: 24

Brand: Audi Pages: 12

2008 MX-5 Miata

Brand: Mazda Pages: 400

Brand: Weltmann KFZ-Teile Pages: 12

Brand: Calix group Pages: 4

Brand: AL-KO Pages: 40

Brand: Thule Pages: 8

Brand: Magneti Marelli Pages: 9

Brand: Vauxhall Pages: 4

Brand: Raider Pages: 2

Brand: Menabo Pages: 12

Brand: Bazooka Pages: 2

Brand: Prorack Pages: 13

Brand: CAME Pages: 14

Brand: Kleinn Air Horns Pages: 38

1975 Mustang II

Brand: Ford Pages: 94

Brand: Blueant Pages: 73

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands