Chrysler 300 2017 Owner'S Manual Download Page 141 | Manualshive

Page: 141 / 488

background image

If the system is set when the vehicle speed is below 20 mph
(32 km/h), the set speed shall be defaulted to 20 mph
(32 km/h). If the system is set when the vehicle speed is
above 20 mph (32 km/h), the set speed shall be the current
speed of the vehicle.

NOTE:

ACC cannot be set if there is a stationary vehicle in

front of your vehicle in close proximity.

Remove your foot from the accelerator pedal. If you do not,
the vehicle may continue to accelerate beyond the set
speed. If this occurs:

•

The message “DRIVER OVERRIDE” will appear in the
instrument cluster display.

•

The system will not be controlling the distance between
your vehicle and the vehicle ahead. The vehicle speed
will only be determined by the position of the accelera-
tor pedal.

To Cancel

The following conditions cancel the system:

•

The brake pedal is applied.

•

The CANC button is pushed.

•

An Anti-Lock Brake System (ABS) event occurs.

•

The gear selector is removed from the DRIVE position.

•

The braking temperature exceeds normal range (over-
heated).

•

The Electronic Stability Control/Traction Control Sys-
tem (ESC/TCS) activates.

•

The vehicle parking brake is applied.

•

Driver seatbelt is unbuckled at low speeds.

•

Driver door is opened at low speeds.

NOTE:

If your vehicle stays at standstill for longer than

two seconds, then the system will cancel and the brake
force will be ramped-out. The driver will have to apply the
brakes to keep the vehicle at a standstill.

To Turn Off

The system will turn off and erase the set speed in memory
if:

•

The Normal (Fixed Speed) Cruise Control on/off button
is pushed.

•

The ignition is turned OFF.

•

The Adaptive Cruise Control (ACC) on/off button is
pushed.

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

139

«
...
139
140
141
142
143
...
»

Summary of Contents for 300 2017









































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 300 2017

Brand: Lancia Pages: 191

Brand: JANE Pages: 6

Brand: Jeda Pages: 8

Brand: Jeep Pages: 496

Brand: UltraGauge Pages: 55

Brand: Vauxhall Pages: 2

Brand: Vauxhall Pages: 2

Brand: Vauxhall Pages: 2

Brand: Vauxhall Pages: 209

Brand: VBC Racing Pages: 34

2013 Corsa Infotainment system

Brand: Vauxhall Pages: 2

Brand: Vauxhall Pages: 2

Brand: Vauxhall Pages: 236

Brand: Paxton Automotive Pages: 85

Brand: Thule Pages: 8

Brand: Brodit Pages: 2

Brand: Power Fist Pages: 12

Brand: EAL Pages: 7

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands