Chrysler 300 2017 Owner'S Manual Download Page 139

Page: 139 / 488

Adaptive Cruise Control (ACC) Operation

The speed control buttons (located on the right side of the
steering wheel) operates the ACC system.

NOTE:

Any chassis/suspension or tire size modifications

to the vehicle will effect the performance of the Adaptive
Cruise Control and Forward Collision Warning System.

Activating Adaptive Cruise Control (ACC)

You can only engage ACC if the vehicle speed is above
0 mph (0 km/h).

The minimum set speed for the ACC system is 20 mph
(32 km/h).

When the system is turned on and in the ready state, the
instrument cluster display will read “ACC Ready.”

When the system is off, the instrument cluster display will
read “Adaptive Cruise Control (ACC) Off.”

NOTE:

You cannot engage ACC under the following con-

ditions:

•

When you apply the brakes.

•

When the parking brake is set.

•

When the automatic transmission is in PARK, REVERSE
or NEUTRAL.

•

When the vehicle speed is outside of the speed range.

•

When the brakes are overheated.

Adaptive Cruise Control Buttons

1 — Normal (Fixed Speed)
Cruise Control On/Off

5 — Distance Setting Increase

2 — SET+/Accel

6 — Adaptive Cruise Control
(ACC) On/Off

3 — RES/Resume

7 — Distance Setting Decrease

4 — SET-/Decel

8 — CANC/Cancel

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

137

Summary of Contents for 300 2017









































































































































































































































































































































































































































































































Search results

Summary of Contents for 300 2017

Reviews:

Related manuals for 300 2017

Brands by name

Popular brands

Chrysler 300 2017, Owner'S Manual

Search results

Summary of Contents for 300 2017

Reviews:

Related manuals for 300 2017

Brands by name

Popular brands