manualshive.com logo in svg

Chrysler 300 2012, Owner'S Manual

The Chrysler 300 2012 is a luxurious and powerful sedan, boasting impressive specifications such as a robust engine, refined interior, and advanced safety features. If you're in need of its user manual, head over to manualshive.com to download it for free. Discover all the necessary details about this remarkable vehicle before hitting the road.

Share
Download
background image

WARNING!

The Electronic Stability Control (ESC) cannot pre-
vent the natural laws of physics from acting on the
vehicle, nor can it increase the traction afforded by
prevailing road conditions. ESC cannot prevent acci-
dents, including those resulting from excessive speed
in turns, driving on very slippery surfaces, or hydro-
planing. Only a safe, attentive, and skillful driver can
prevent accidents. The capabilities of an ESC
equipped vehicle must never be exploited in a reck-
less or dangerous manner which could jeopardize the
user’s safety or the safety of others.

Hill Start Assist (HSA)

The HSA system is designed to assist the driver when
starting a vehicle from a stop on a hill. HSA will maintain
the level of brake pressure the driver applied for a short
period of time after the driver takes their foot off of the

brake pedal. If the driver does not apply the throttle
during this short period of time, the system will release
brake pressure and the vehicle will roll down the hill. The
system will release brake pressure in proportion to the
amount of throttle applied as the vehicle starts to move in
the intended direction of travel.

HSA Activation Criteria

The following criteria must be met in order for HSA to
activate:

•

Vehicle must be stopped.

•

Vehicle must be on a 6% (approximate) grade or
greater hill.

•

Gear selection matches vehicle uphill direction (i.e.,
vehicle facing uphill is in forward gear; vehicle back-
ing uphill is in REVERSE gear).

5

STARTING AND OPERATING

383

Summary of Contents for 300 2012

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 300 2012

Jeep Commander Overview Manual preview
Commander
Brand: Jeep Pages: 25
Jeep Commander Warranty Information Booklet preview
Commander
Brand: Jeep Pages: 51
Farenheit CCD-5XS Owner'S Manual preview
CCD-5XS
Brand: Farenheit Pages: 8
Daewoo RACER 1998 Electrical Wiring Diagram preview
RACER 1998
Brand: Daewoo Pages: 68
Hyundai Getz 2004 Owner'S Manual preview
Getz 2004
Brand: Hyundai Pages: 437
PEUGEOT Partner Origin Handbook preview
Partner Origin
Brand: PEUGEOT Pages: 128
Schumacher Electric SPI6 Owner'S Manual preview
SPI6
Brand: Schumacher Electric Pages: 87
Cadillac 2009 ESCALADE ESV Owner'S Manual preview
2009 ESCALADE ESV
Brand: Cadillac Pages: 602
Sirius Satellite Radio Streamer GTR Installation Manual preview
Streamer GTR
Brand: Sirius Satellite Radio Pages: 8
minnid 1.240.344 Operating Instructions Manual preview
1.240.344
Brand: minnid Pages: 44
Marlon Xplore Pro II SxS Owner’S Manual Assembly & Installation Instructions preview
Xplore Pro II SxS
Brand: Marlon Pages: 15
Kuda 182220 Installation Instruction preview
182220
Brand: Kuda Pages: 3
LXE Akerstroms Tx700 Configuration Manual preview
Akerstroms Tx700
Brand: LXE Pages: 146
Lexus LS 460 2011 Owner'S Manual preview
LS 460 2011
Brand: Lexus Pages: 830
MBRP 0130717 Assembly preview
0130717
Brand: MBRP Pages: 5
Volvo V70 2014 Quick Manual preview
V70 2014
Brand: Volvo Pages: 16
JBA 1528S Installation Instructions And Warranty Information preview
1528S
Brand: JBA Pages: 5
Ford TRANSIT 2015 Quick Reference Manual preview
TRANSIT 2015
Brand: Ford Pages: 8

Brands by name

Popular brands

Load more brands