Chrysler 2008 PT Cruiser Owner'S Manual Download Page 307 | Manualshive

Page: 307 / 491

background image

To maintain a safe speed and prolong brake life, shift
down to SECOND or FIRST gear when descending a
steep grade.

When turning a corner, or driving up a steep grade,
downshift early so that the engine will not be overbur-
dened.

PARKING BRAKE

When the parking brake is applied with the
ignition on, the BRAKE Light in the instrument
cluster will come on.

NOTE:

This light only shows that the parking brake is

on. It does not show the degree of brake application.

If the parking brake is applied while the vehicle is
moving, a chime will sound to alert the driver. The chime
will sound up to 10 times or until the vehicle has
returned to a stop.

Before leaving the vehicle, make sure that the parking
brake is set. To set the parking brake, pull up firmly on
the lever. Always shift the gear selector lever into the
PARK position (automatic transaxle) or into the RE-
VERSE position (manual transaxle). To release the park-
ing brake, apply the brake pedal, pull up slightly on the
lever, then depress the button on the end of the lever and
push the lever fully down toward the floor.

STARTING AND OPERATING

305

5

«
...
305
306
307
308
309
...
»

Summary of Contents for 2008 PT Cruiser












































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2008 PT Cruiser

Brand: JAC Pages: 70

Brand: CAMPARK Pages: 20

Brand: BESAFE Pages: 4

Brand: Whispbar Pages: 77

Brand: A-Tach Pages: 2

Brand: METRON Pages: 4

Brand: Subaru Pages: 19

2003 Silhouette

Brand: Oldsmobile Pages: 466

Brand: Ford Pages: 51

IONIQ HYBRID 2019

Brand: Hyundai Pages: 16

Brand: Volkswagen Pages: 44

Brand: LAS Pages: 4

Brand: LAS Pages: 24

Brand: Hendrickson Pages: 60

Brand: LAS Pages: 9

Brand: ETC Pages: 11

Brand: Sune Technology Pages: 8

8EM1310-2EH04-0GA0

Brand: Siemens Pages: 37

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands